Design and Development
The Yak-12 was designed by Yakovlev's team to meet a requirement of the Soviet Air Force of 1944 for a new liaison and utility plane, to replace the obsolete Po-2 biplane. It was also meant to be used in civil aviation as a successor to Yakovlev's AIR-6 of 1934, built in a relatively small series. Yakovlev's first proposal was a four-place high-wing aircraft, the Yak-10 (first named Yak-14), built in January 1945. It won the competition with a low-wing Yak-13, based on the same fuselage, and a series of 40 Yak-10s were produced, powered with a 108 kW (145 hp) Shvetsov M-11M radial.
In 1947, Yakovlev developed a new aircraft to replace the Yak-10. This was fitted with a more powerful 119 kW (160 hp) M-11FR, a new wing and undercarriage, and a fuselage with a revised shape (lower tail). The new type was designated Yak-12, first flying in 1947. 788 of the basic variant were produced, including military observation planes, some Yak-12S air ambulances, Yak-12SKh agricultural aircraft and Yak-12GR floatplanes. A distinguishing feature of the basic Yak-12, just like Yak-10, were engine cylinders with individual cowlings. It was a plane of a mixed construction and could take 1 or 2 passengers, apart from a pilot.
The next generation Yak-12 entered production in 1952, starting with the Yak-12R. It was fitted with a new 194 kW (260 hp) Ivchenko AI-14R radial and all-metal construction. The wing area increased (from 21.6 m² to 23.8 m²). This variant had the least wing loading of all Yak-12s, and therefore best STOL performance (take-off run 52 m/171 ft, landing 81 m/266 ft).
After being lengthened to improve weight distribution, with further strengthening of the structure and other minor changes, from 1955 the Yak-12M ("modified") was produced. A visible difference was a lengthened, curved tailfin. This variant became more universal, offering a bigger payload. It took a pilot and 3 passengers and could be fitted with dual controls for training, a stretcher for an ambulance role or an agricultural spraying device. It became the most numerous variant.
The last generation, produced from 1957, was the Yak-12A. It was an aerodynamically refined variant, with a slimmer fuselage and a new wing. The cowling was smaller diameter. The rectangular wings were fitted with trapezoidal ends and automatic slats, also single struts replaced twin struts. Navigation equipment and controls were improved, and performance also increased. In the USSR, 3,801 of Yak-12s were built in all models (including 3,013 Yak-12R, M and A). An experimental Yak-12B biplane was also developed, but did not enter production.
The Yak-12M was licence-built from 1956 in Poland as the WSK-4 Okecie, or Jak-12M (Polish spelling of Russian name). From 1959, the Yak-12A was built in Poland (1,054 Jak-12Ms, 137 Jak-12As), most for export to the USSR. In 1958, further development of the Yak-12M was carried out in Poland, becoming the PZL-101 Gawron.
The Yak-12 was also produced in China as Shenyang type 5.
Read more about this topic: Yakovlev Yak-12
Famous quotes containing the words design and/or development:
“If I knew for a certainty that a man was coming to my house with the conscious design of doing me good, I should run for my life ... for fear that I should get some of his good done to me,—some of its virus mingled with my blood.”
—Henry David Thoreau (1817–1862)
“There are two things which cannot be attacked in front: ignorance and narrow-mindedness. They can only be shaken by the simple development of the contrary qualities. They will not bear discussion.”
—John Emerich Edward Dalberg, 1st Baron Acton (1834–1902)