William Henry Barlow - Career

Career

From 1832, he spent six years working as an engineer in Constantinople, Turkey, helping build an ordnance factory on behalf of machine tool manufacturers Maudslay, Sons & Field. He also produced a report for the Turkish government on lighthouses in the Bosphorus, which led to his first two scientific papers. For his services to the Turkish government he was awarded the Order of Nishan Iftikhar (Order of Glory).

Barlow returned to Britain in 1838 to take up a post as assistant engineer on the Manchester and Birmingham Railway working for George W. Buck. In 1842, he joined the Midland Counties Railway as resident engineer for the section between Rugby and Derby. When the Midland Counties Railway became part of the Midland Railway in 1844, he retained the position, later becoming chief engineer of the larger railway. On 1 April 1845, Barlow was elected a member of the Institution of Civil Engineers and on 6 June 1850 he was elected a Fellow of the Royal Society.

Whilst working on the Midland Railway's main line, Barlow established that the replacement of sleepers was a larger part of the cost of track maintenance than the replacement of rails because the sleepers decayed more quickly than the rails wore-out and needed renewal more often. To remove the cost of providing and replacing sleepers, he developed and patented his own rail design in 1849. It had a wide flanged profile which could be laid directly on to track ballast without the need for sleepers, with just periodic tie-bars to maintain the correct gauge. Known as the Barlow rail, it was widely used, especially by the Great Western Railway.

Joseph Paxton, designer of the cast iron and glass Crystal Palace for The Great Exhibition of 1851, was a director of the Midland Railway and he asked Barlow for his help in the preparation of the structural calculations for the frame of the building.

In 1857, Barlow left the Midland Railway to form his own consultant engineering practice in London, with the Midland Railway as a significant client. Following the death of Isambard Kingdom Brunel in 1859, Barlow was commissioned with John Hawkshaw to complete the Clifton Suspension Bridge, Bristol, construction of which had been stalled since 1843 due to insufficient funds to finish it. Reusing the chains from Brunel's earlier Hungerford Suspension Bridge in London, demolished in 1860, Barlow and Hawkshaw completed the bridge in 1864 with a more robust deck than Brunel had planned and other variations caused by the reuse of the existing chains. Its 702-foot (214 m) span was the longest in Britain at the time.

Between 1862 and 1869, Barlow was consultant engineer for the Midland Railway's southern extension from Bedford to London, including the layout of the London terminus station at St Pancras on Euston Road. To deal with the sloping site and the need to cross the Regent's Canal a short distance to the north, the platforms were constructed on a raised structure supported on cast iron columns and girders. Under this storage was laid out for beer from the breweries at Burton upon Trent. With assistance from Rowland Mason Ordish, Barlow also designed the arched, cast iron station canopy which spans 240 feet (73 m) across the platforms without intermediate support – then the widest of its kind in the world. It was designed as a cost effective and efficient means of avoiding the need for additional solid structure in the lower level. George Gilbert Scott designed the hotel in front of the train shed.

On 28 December 1879, the central section of the North British Railway's bridge across the River Tay near Dundee collapsed in the Tay Bridge disaster as an express train crossed it in a heavy storm. All 75 passengers and crew on the train were killed. As the newly elected President of the Institution of Civil Engineers, Barlow was appointed as a member of the Board of Trade's Court of Inquiry into the disaster. He sat with Henry Cadogan Rothery and William Yolland, co-authoring one of the final reports with Yolland recommending a commission be established to examine wind loads on bridges. In its report dated 30 June 1880, the Court of Inquiry concluded that the bridge, designed by Sir Thomas Bouch and opened only the year before its collapse, had been "badly designed, badly built and badly maintained". The entire central box truss section of the bridge known as the "High Girders" collapsed along with the thirteen trestles supporting it, leaving a gap of nearly half-a-mile in the 2-mile (3.2 km) long bridge.

His reputation destroyed, Bouch died in October 1880. Work on the suspension bridge he had designed to cross the Firth of Forth was stopped after the Tay Bridge collapse and Barlow, Sir John Fowler and Thomas Elliot Harrison, consultant engineers for the three railway companies involved in the construction, were asked to choose a replacement design. The solution was the cantilevered Forth Bridge by Fowler and Sir Benjamin Baker.

In 1881 Barlow sat as member of the Wind Pressure (Railway Structures) Commission established at the recommendation of the Tay Bridge report. He led the design of the replacement Tay Bridge (1882–87) with his son Crawford Barlow as engineer. The new design used large monocoque piers to support a double railway track. The old brick and masonry piers from the first bridge were retained as breakwaters for the new piers upstream. They can still be seen today as a forlorn reminder of the tragedy of 1879.

Barlow was an early experimenter with civil engineering uses for steel, carrying out research at Woolwich Arsenal in the 1850s and being a member of the Institution of Civil Engineers' committee on the subject. From 1873 he was a member of a Board of Trade committee which produced the first recommendations on safe working loads for steel in railway structures in 1877.

Barlow also experimented with sound recording. In February 1874 he presented the Royal Society with a talk On the Pneumatic Action which accompanies the Articulation of Sounds by the Human Voice, as exhibited by a Recording Instrument. He called his 'recording instrument' a Logograph.

Barlow was a Fellow of the Royal Society of Edinburgh, a member of the Institution of Mechanical Engineers and the Society of Arts. He served as Vice President of the Royal Society in 1881 and was an honorary member of the Société des Ingénieurs Civil de France. He was also a Lieutenant-Colonel in the Railway Volunteer Staff Corps.

With his health failing, he retired from practice in 1896, along with his son. He died on 12 November 1902 from exhaustion after breaking his leg. His home "High Combe", Charlton Road, Greenwich, is marked with a blue plaque.