T2
Production | August 1967 – July 1979 (Europe and US) 1971–1996 (Mexico) 1976–present (Brazil) 1981–1986 (Argentina) |
---|---|
Assembly | Hanover, Germany Emden, Germany General Pacheco, Argentina São Bernardo do Campo, Brazil Puebla, Puebla, Mexico Melbourne, Australia |
Platform | Volkswagen Transporter T2 |
Engine | 1.6 L 35kW B4 1.6 L 37kW B4 1.7 L 46-49kW B4 1.8 L 50 kW B4 1.8 L 67 kW I4 2.0 L 52kW B4 |
Transmission | 4-speed manual 3-speed automatic |
Wheelbase | 2,400 mm (94.5 in) |
Length | 4,505 mm (177.4 in) |
Width | 1,720 mm (67.7 in) |
Height | 2,040 mm (80.3 in) |
In late 1967, the second generation of the Volkswagen Type 2 (T2) was introduced. It was built in Germany until 1979. In Mexico, the Volkswagen Combi and Panel were produced from 1970 to 1994. Models before 1971 are often called the T2a (or "Early Bay"), while models after 1972 are called the T2b (or "Late Bay").
This second-generation Type 2 lost its distinctive split front windshield, and was slightly larger and considerably heavier than its predecessor. Its common nicknames are Breadloaf and Bay-window, or Loaf and Bay for short. At 1.6 L and 35 kW (48 PS; 47 bhp) DIN, the engine was also slightly larger. The new model also did away with the swing axle rear suspension and transfer boxes previously used to raise ride height. Instead, half-shaft axles fitted with constant velocity joints raised ride height without the wild changes in camber of the Beetle-based swing axle suspension. The updated Bus transaxle is usually sought after by off-road racers using air-cooled Volkswagen components.
The T2b was introduced by way of gradual change over three years. The first models featured rounded bumpers incorporating a step for use when the door was open (replaced by indented bumpers without steps on later models), front doors that opened to 90° from the body, no lip on the front guards, and crescent air intakes in the D-pillars (later models after the Type 4 engine option was offered, have squared off intakes). They also had unique engine hatches, and up until 1971 front indicators set low on the nose rather than high on either side of the fresh air grille – giving rise to their nickname as "Low Lights". The 1971 Type 2 featured a new, 1.6 L engine with dual intake ports on each cylinder head and was DIN-rated at 37 kW (50 PS; 50 bhp). An important change came with the introduction of front disc brakes and new roadwheels with brake ventilation holes and flatter hubcaps. 1972's most prominent change was a bigger engine compartment to fit the larger 1.7- to 2.0-litre engines from the Volkswagen Type 4, and a redesigned rear end which eliminated the removable rear apron. The air inlets were also enlarged to accommodate the increased cooling air needs of the larger engines.
In 1971 the 1600cc Type 1 engine as used in the Beetle, was supplemented with the 1700cc Type 4 engine – as it was originally designed for the Type 4 (411 and 412) models. European vans kept the option of upright fan Type 1 1600 engine but the 1700 Type 4 became standard for US spec models.
In the Type 2, the Type 4 engine was an option for the 1972 model year onward. This engine was standard in models destined for the US and Canada. Only with the Type 4 engine did an automatic transmission become available for the first time in the 1973 model year. Both engines displaced 1.7 L, DIN-rated at 49 kW (67 PS; 66 bhp) with the manual transmission and 46 kW (63 PS; 62 bhp) with the automatic. The Type 4 engine was enlarged to 1.8 L and 50 kW (68 PS; 67 bhp) DIN for the 1974 model year and again to 2.0 L and 52 kW (71 PS; 70 bhp) DIN for the 1976 model year. The 1978 2.0 L now featured hydraulic valve lifters, eliminating the need to periodically adjust the valve clearances as on earlier models. The 1975 and later U.S. model years received Bosch L-Jetronic electronic fuel injection as standard equipment; 1978 was the first year for electronic ignition, utilizing a hall effect sensor and digital controller, eliminating maintenance-requiring contact-breaker points. As with all Transporter engines, the focus in development was not on power, but on low-end torque. The Type 4 engines were considerably more robust and durable than the Type 1 engines, particularly in Transporter service.
The year 1971 also saw exterior revisions including relocated front turn indicators, squared off and set higher in the valance, above the headlights – 1972 saw square-profiled bumpers, which became standard until the end of the T2 in 1979. Crash safety improved with this change due to a compressible structure behind the front bumper. This meant that the T2b was capable of meeting US safety standards for passenger cars of the time, though not required of vans. The "VW" emblem on the front valance became slightly smaller.
Later model changes were primarily mechanical. By 1974, the T2 had gained its final shape. Very late in the T2's design life, during the late 1970s, the first prototypes of Type 2 vans with four-wheel drive (4WD) were built and tested.
-
1979 Volkswagen Type 2 (T2) "Silverfish" last-edition bus. These were a limited edition model to mark the final production of T2 models in Europe
-
1968 Volkswagen Type 2 (T2) Hard-Top Westfalia "Cream" bus
-
Late 1970s T2b Ambulance
-
Brazilian Volkswagen Type 2 (T2) – 2005 Limited Edition
-
Brazilian watercooled Volkswagen Type 2 (T2)
-
Brazilian watercooled Volkswagen Type 2 (T2) – Interior
-
Brazilian Volkswagen Type 2 (T2) – 1.4 L engine bay
-
1977 Volkswagen Kombi Westfalia (North America)
-
Volkswagen Kombi Westfalia (North America)
-
Air cooled model used as an airport van at São Paulo Airport, Brazil
-
VW Kombi, turned into a party bar in Thailand
Read more about this topic: Volkswagen Type 2