Virtual Network Computing - Operation

Operation

A VNC system consists of a client, a server, and a communication protocol

• The VNC server is the program on the machine that shares its screen. The server passively allows the client to take control of it.
• The VNC client (or viewer) is the program that watches, controls, and interacts with the server. The client controls the server.
• The VNC protocol (RFB) is very simple, based on one graphic primitive from server to client ("Put a rectangle of pixel data at the specified X,Y position") and event messages from client to server.

Note that the machine the VNC server is running on does not need to have a physical display. In the normal method of operation a viewer connects to a port on the server (default port 5900). Alternatively a browser can connect to the server (depending on the implementation) (default port 5800). And a server can connect to a viewer in "listening mode" on port 5500. One advantage of listening mode is that the server site does not have to configure its firewall to allow access on port 5900 (or 5800); the onus is on the viewer, which is useful if the server site has no computer expertise, while the viewer user would be expected to be more knowledgeable.

The server sends small rectangles of the framebuffer to the client. In its simplest form, the VNC protocol can use a lot of bandwidth, so various methods have been devised to reduce the communication overhead. For example, there are various encodings (methods to determine the most efficient way to transfer these rectangles). The VNC protocol allows the client and server to negotiate which encoding will be used. The simplest encoding, which is supported by all clients and servers, is the raw encoding where pixel data is sent in left-to-right scanline order, and after the original full screen has been transmitted, only transfers rectangles that change. This encoding works very well if only a small portion of the screen changes from one frame to the next (like a mouse pointer moving across a desktop, or text being written at the cursor), but bandwidth demands get very high if a lot of pixels change at the same time, such as when scrolling a window or viewing full-screen video.

VNC by default uses TCP port 5900+N, where N is the display number (usually :0 for a physical display). Several implementations also start a basic HTTP server on port 5800+N to provide a VNC viewer as a Java applet, allowing easy connection through any Java-enabled web browser. Different port assignments can be used as long as both client and server are configured accordingly.

Using VNC over the Internet works well if the user has a broadband connection at both ends. However, it may require advanced NAT, firewall and router configuration such as port forwarding in order for the connection to go through. Some users may choose to use instant private networking applications such as Virtual Private Network (VPN) applications such as Hamachi to make usage over the Internet much easier. Alternatively, a VNC connection can be established as a LAN connection if VPN is utilized as a proxy.

Xvnc is the Unix VNC server, which is based on a standard X server. To applications Xvnc is an X "server" (i.e. displays client windows), and to remote VNC users it is a VNC server. Applications can display themselves on Xvnc as if it were a normal X display, but they will appear on any connected VNC viewers rather than on a physical screen. Alternatively a machine (which may be a workstation or a network server) with screen, keyboard, and mouse can be set up to boot and run the VNC server as a service or daemon, then the screen, keyboard, and mouse can be removed and the machine stored in an out-of-the way location.

In addition, the display that is served by VNC is not necessarily the same display seen by a user on the server. On Unix/Linux computers that support multiple simultaneous X11 sessions, VNC may be set to serve a particular existing X11 session, or to start one of its own. It is also possible to run multiple VNC sessions from the same computer. On Microsoft Windows the VNC session served is always the current user session.

VNC is commonly used as a cross-platform remote desktop system. For example, Apple Remote Desktop for Mac OS X (and more recently, "Back to My Mac" in 'Leopard' - Mac OS X 10.5) interoperates with VNC and will connect to a Linux user's current desktop if it is served with x11vnc, or to a separate X11 session if one is served with TightVNC. From Linux, TightVNC will connect to a Mac OS X session served by Apple Remote Desktop if the VNC option is enabled, or to a VNC server running on Microsoft Windows.