V Angles
The most prevalent V angle for a V8 is 90°. This configuration features a wide, low engine with optimal firing and vibration characteristics. Many V6 and V10 engine configurations are derived from production V8 designs, they often use the 90° angle; however, balance shafts are incorporated to reduce vibration or more complex cranks to even the firing cycle. V8s can use different angles. One notable example is the Ford/Yamaha V8 used in the Ford Taurus SHO. It was based on Ford's Duratec V6 and shares that engine's 60° vee angle. A similar Yamaha-built engine is used by Volvo Cars as of 2005. These engines were designed for transverse front-wheel-drive installation and are narrower than usual for efficient use of space. Because they are not at the ideal 90° angle for a V8, they require a counter-rotating balance shaft and offset split crankpins for complete smoothness. In 2010, GM introduced a 4.5 L Duramax diesel V8 with a 72° angle in which they state, "Considering manufacturing tolerances, a 72° V-8 engine can actually deliver better balance than a 90 engine." 72° V8 engines have been used in modern racing.
The Rover Meteorite V8 engine was derived from the Rover Meteor tank engine (hence derived from the Merlin aero engine), so shared the Meteor's 60° vee angle. In years past, Electro-Motive produced an 8-cylinder version of their model 567 Diesel locomotive engine, with a 45° cylinder angle. The 1932 Miller four-wheel drive race cars also featured a 45° V8.
An extremely narrow-angle V8 was introduced by Lancia in 1922, which had an angle between cylinder banks of only 14°. This created an engine that was shorter than a straight-6, but much narrower than a conventional V8. It was based on a Lancia V4 engine design that was almost completely "square" in the length and width of its layout. Because of their compact design and overhead camshafts, these engines were lighter and more powerful than comparable engines of the time. Although Lancia stopped making the V8 design around World War II, the basic concept is used today in the Volkswagen VR6 engine.
Read more about this topic: V8 Engine