USS Winslow (DD-53) - Design and Construction

Design and Construction

Winslow was authorized in March 1913 as the third of six ships of the O'Brien class, which was an improved version of the Cassin-class destroyers authorized in 1911. Construction of the vessel was awarded to William Cramp and Sons of Philadelphia which laid down her keel on 1 October 1913. On 11 February 1915, Winslow was launched by sponsor Miss Natalie E. Winslow, grandniece of the ship's namesake, John Ancrum Winslow. The ship was the second ship named for Winslow, a US Navy officer notable for sinking the Confederate commerce raider CSS Alabama during the American Civil War. As built, the destroyer was 305 ft 3 in (93.04 m) in length, 31 ft 1 in (9.47 m) abeam, and drew 10 ft 4.5 in (3.162 m). The ship had a standard displacement of 1,050 long tons (1,070 t) and displaced 1,171 long tons (1,190 t) when fully loaded.

Winslow had two Zoelly steam turbines that drove her two screw propellers, and an additional pair triple-expansion steam engines, each connected to one of the propeller shafts, for cruising purposes. Four oil-burning White-Forster boilers powered the engines, which could generate 17,000 shp (13,000 kW), moving the ship at up to 29 knots (33 mph; 54 km/h).

Winslow's main battery consisted of four 4 in (100 mm)/50 cal Mark 9 guns, with each gun weighing in excess of 6,100 lb (2,800 kg). The guns fired 33 lb (15 kg) armor-piercing projectiles at 2,900 ft/s (880 m/s). At an elevation of 20°, the guns had a range of 15,920 yd (14,560 m).

Winslow was also equipped with eight 21 in (530 mm) torpedo tubes. The General Board of the United States Navy had called for two anti-aircraft guns for the O'Brien-class ships, as well as provisions for laying up to 36 floating mines. From sources, it is unclear if these recommendations were followed for Winslow or any of the other ships of the class.