Direct Drive
Electrical power stations use large steam turbines driving electric generators to produce most (about 80%) of the world's electricity. The advent of large steam turbines made central-station electricity generation practical, since reciprocating steam engines of large rating became very bulky, and operated at slow speeds. Most central stations are fossil fuel power plants and nuclear power plants; some installations use geothermal steam, or use concentrated solar power (CSP) to create the steam. Steam turbines can also be used directly to drive large centrifugal pumps, such as feedwater pumps at a thermal power plant.
The turbines used for electric power generation are most often directly coupled to their generators. As the generators must rotate at constant synchronous speeds according to the frequency of the electric power system, the most common speeds are 3,000 RPM for 50 Hz systems, and 3,600 RPM for 60 Hz systems. Since nuclear reactors have lower temperature limits than fossil-fired plants, with lower steam quality, the turbine generator sets may be arranged to operate at half these speeds, but with four-pole generators, to reduce erosion of turbine blades.
Read more about this topic: Steam Turbine
Famous quotes containing the words direct and/or drive:
“Pleasure is the rock which most young people split upon; they launch out with crowded sails in quest of it, but without a compass to direct their course, or reason sufficient to steer the vessel; for want of which, pain and shame, instead of pleasure, are the returns of their voyage.”
—Philip Dormer Stanhope, 4th Earl Chesterfield (1694–1773)
“The Thirties dreamed white marble and slipstream chrome, immortal crystal and burnished bronze, but the rockets on the Gernsback pulps had fallen on London in the dead of night, screaming. After the war, everyone had a car—no wings for it—and the promised superhighway to drive it down, so that the sky itself darkened, and the fumes ate the marble and pitted the miracle crystal.”
—William Gibson (b. 1948)