North American Broadcast Television Frequencies - Changes and Variations

Changes and Variations

Channel 1 was removed early on as a community television reservation and given to amateur radio and other uses. Channels 70 through 83 were removed from the bandplan in the 1980s to make way for AMPS mobile phone service. These channels were mainly used in the U.S., and mainly for broadcast translators, some of which continued in operation if their frequencies were not used by cellular. Channel 37 is allocated to radio astronomy and may not be used by any station.

In the U.S., channels 52 through 69 are being reallocated for other purposes as the transition to digital television broadcasting is completed for low-power TV stations. All full-power analog broadcasts ended in June 2009, and all temporary full-power digital broadcasts moved back down to the lower channels. While most other countries abandoned VHF due to its poor suitability for TV broadcasting and allocation for Digital Audio Broadcasting, the FCC chose to cut high-UHF channels instead, because frequency-use rights could be auctioned for a greater price.

Channels 14 through 19 are used for two-way radio in major cities on a non-interference basis, although the transition to digital television (DTV) has caused problems in certain instances when a previously unused channel has begun to be used for DTV broadcasts. The same holds true for wireless microphones and medical telemetry devices in that band.

In most regions, new digital television stations are placed on UHF (14 to 51, except 37 and sometimes 14 and 20) or high-VHF channels (7-13), although others are used in some of the more crowded media markets. With virtual channel numbering, many digital televisions group digital channels with their corresponding analog broadcasts. For example, the first digital TV stream of a station that broadcasts analog TV on channel 4 will usually appear as 4-1 or 4.1 on a DTV receiver, even though the digital transmissions may be on channel 38. Several digital subchannels can be multiplexed together, so 4-1 through 4-5 might be used by one station. Subchannel 0 (e.g., 4-0) designates the analog broadcast. In the U.S., all channels from 7-36 and 38-51 are frequently used for digital TV broadcasts. However, VHF 2 to 6 are rarely used by DTV broadcasters due to ongoing problems with impulse noise, and channel 6 being an adjacent channel to the FM broadcast band. Additionally, VHF performance is poor for mobile TV, with ATSC-M/H being the standard finalized and approved in late 2009.

The VHF bandplan was modified several times before 1948. The last change was the transfer of channel 1, originally intended as a low-power (less than 1,000 watts) LPTV community channel, to two-way land-mobile radio and the six-meter amateur radio band. Amateur television (ATV) is used on four channels in the 420-450 MHz (70-centimeter) amateur band; UHF TV channel 14 starts at 470 MHz. These ATV channels are popular for repeater output and direct communications and are seen over-the-air with a cable-ready tuner set to channels 57 to 60 (14 being seen on 65). ATV is also used on the other amateur bands above 450 MHz. ATV is also known as HAM TV or Fast Scan TV.

In March 2008, the FCC requested public comment on turning the bandwidth currently occupied by analog television channels 5 and 6 (76–88 MHz) over to extending the FM broadcast band when the digital television transition was to be completed in February 2009 (ultimately delayed to June 2009). This proposed allocation would effectively assign frequencies corresponding to the existing Japanese FM radio service (which begins at 76 MHz) for use as an extension to the existing North American FM broadcast band.