Nintendo Entertainment System (Model NES-101) - Control Deck (model NES-101)

Control Deck (model NES-101)

The external appearance was greatly overhauled and restyled to align its looks to the North American Super Nintendo Entertainment System and to address a number of commonly cited ergonomic problems of the original NES-001 model. The case design was by Lance Barr, who also designed the NES-001, the SNS-001 and the SNS-101 case. The power and reset buttons, while never a problem with the original design, now matched the curvature of the new look. The NES-101 does not have an LED power light to indicate the unit is on, as the original NES-001 and SNS-001 included.

The most obvious change in the redesign was the removal of the cartridge-loading system that caused trouble in maintenance and game-swapping when using the NES-001 model. In that system, the user had to first open the lid of the case, slide in the cartridge, then press it down. The large space inside allowed plenty of room for dust to settle and the contact heads were almost impossible to access and clean without unscrewing the case or using the official cleaning kit. Wear and tear was another problem; with continued use, the precision of the mechanism deteriorated and the user would have to poke and nudge at the cartridge to move it to a position that would be read correctly. The NES-101 returned to the standard top-loading method, used by almost all cartridge systems before and since for its ease and reliability.

The design of the game controllers was changed. These were officially known as NES-039 model controllers and informally known as "dogbone" controllers. They were packaged with the system and also sold separately. The controllers were restyled to resemble the SNES controller, with rounded edges that fit more ergonomically in the hands than the old rectangular design (NES-004). The NES-039 model controller does not fit in R.O.B.'s controller slot because of this ergonomic change. The A and B buttons were also set at an angle to mimic the SNES controller as well as provide better ergonomics. The original NES-004 controllers and the NES-039 design are interchangeable between the original NES-001 model and the NES-101 model.

The 10NES authentication chip was completely removed from the system in an effort to eliminate the blinking red power light problem associated with it in the NES-001 model control deck. The removal of the 10NES chip also allows the system to play games that are unlicensed and/or from different regions such as Europe, something an unmodified NES-001 model control deck cannot do.

The RCA composite video output jacks were removed from the system as well; an RF connection is the only way to connect the system to a television unless you have the console modified to add composite output. The original video amplifier circuit path on the motherboard was poorly designed and created faint black lines in the game image.