Camouflage and Markings
The Ki-84 is known to have appeared in three Japanese Ministry of Munitions sanctioned camouflage schemes;
Type N: The entire airframe was left in its original natural metal. Because of the different grades of alloy used for various panels the overall finish soon weathered or oxidized to a pale metallic grey, with variations in shade and texture, depending on the grade of duralumin used for each area of skin. A black "anti-glare" panel was painted on the top forward fuselage and engine cowling (see photo of 73 Hiko-Sentai aircraft).
Type B: Irregular blotches or stripes of dark green on the basic natural metal scheme. This was applied once the aircraft reached its operational base. On occasion the edges of national (hinomaru) and Sentai markings were accidentally covered.
Type S: Three variations were seen on Ki-84s; S1 – Dark green upper surfaces, with light gray/green lower surfaces. S2 – The light gray/green on the lower surfaces was replaced by a pale blue/gray. These colors were often applied on an unprimed airframe; because of this and the poor adhesion of Japanese paints in the later years of the war this scheme often weathered quickly, with large patches of natural metal being visible (see photo of 85 Hiko-Sentai Ki-84 on a Korean base). S10 – The upper surfaces were left in a red/brown primer with the under surfaces in natural metal. The black anti-glare panel was optional.
Other schemes were applied, particularly by the Shinbu-Tai "Special Attack" units. For example, a Ki-84 of 57 Shinbu-Tai, flown by Corporal Takano, had very dark brown-green upper surfaces (some sources state black), with a large red "arrow" outlined in white painted along the entire length of the fuselage and engine cowling. White Kana characters "hitt-chin" (be sure to sink) were painted above the arrow on the rear fuselage. The under surfaces were light gray.
Factory applied markings included six hinomaru (national insignia), outlined with a 75 mm (2.95 in) white border on camouflaged aircraft, on either side of the rear fuselage and on the upper and lower outer wings. Yellow/orange identification strips were applied to the leading edges of wings, extending from the roots to ⅓ of the wingspan.
It was a general rule that Japanese planes in overseas territories had a narrow white line called the "border break through line" or "field identification mark" surrounding their hinomaru; planes belonging to interception forces in Japan proper placed the insignia inside a white square (colloquially known as the "Homeland Defense bandage"), so that anti-aircraft defense units could more easily distinguish them from enemy planes.
The inside of the fuselage and the wheel cover wells were painted in a dark opaque bluish gray, and the propeller spinner was painted with a variety of colors based on the unit it belonged to.
Read more about this topic: Nakajima Ki-84