Media Composer - Discontinued Hardware

Discontinued Hardware

Recently discontinued

Avid Mojo: includes Composite and S-Video with two channels of RCA audio. There is an optional component video cable that can be added to this interface. This interface only supports SD video formats.

Avid Mojo SDI: includes Composite, S-Video, Component and SDI video, with 4 channels RCA, 4 channels AES and 2 channels optical S/PDIF audio. This interface only supports SD video formats.

Avid Adrenaline: rack mountable interface which includes Composite, S-Video, Component and SDI video, 4 channels of XLR, 4 channels of AES, 2 channels of S/PDIF and 8 channels of ADAT audio. This interface also has an expansion slot for the DNxcel card which adds HD-SDI input and output as well as a DVI and HD component outputs. The DNxcel card uses Avid’s DNxHD compression which is available in 8-bit color formats up to 220mb as well as a 10-bit color format at 220mb. The DNxcel card also adds real-time SD down-convert and HD cross-convert.

Hardware history

Media Composer as standalone software (with optional hardware) has only been available since June, 2006 (version 2.5). Before that, Media Composer was only available as a combination of hardware and software, or as turnkey systems (including CPU and monitors).

From 1991 until 1998, Media Composer 1000, 4000 and 8000 systems were Macintosh-only, and based on the NuVista videoboard by Truevision. The first-release Avids (US) supported 640x480 30i video, at resolutions and compression identified by the prefix "AVR". Single-field resolutions were AVR 1 through 12; interlaced (finishing) resolutions were initially AVR 21-23, with the later improvements of AVR 24 through 27. Additionally, Avid marketed the Media Composer 800 as an offline-only editor. These systems exclusively used external fast SCSI drives (interfaced through a SCSI accelerator board) for media storage. Avid media was digitized as OMFI (Open Media Framework Interchange) format.

In the mid-nineties, versions 6 and 7 of Media Composer 1000 and 8000 were based on the Avid Broadcast Video Board (ABVB), supporting video resolutions up to AVR77. The video image was also improved to 720x480. 3D add-on boards (most notably the Pinnacle Alladin) and 16bit 48K 4-channel and 8-channel audio I/O (Avid/DigiDesign 442 and Avid/DigiDesign 888) were optional.

The 1998 introduction of the Avid Symphony marked the transition from ABVB to the Meridien hardware, allowing for uncompressed SD editing. This introduction was also the first version of Media Composer software available for both Mac and Windows operating systems. Media Composer 9000 versions 8 through 12.0.5 were built around Meridien hardware. Compression options were expressed in ratios for the first time in the evolution of the product. Even though the video board had changed, the audio I/O was still handled by the Avid/DigiDesign 888 (16bit 48K) hardware. At this time, 16x9 aspect ratios began to be supported. Avid Media Composer Meridien was released through November, 2003.

In 2003, Avid Mojo and Avid Adrenaline formed the new DNA (Digital Non-linear Accelerator) hardware line. The launch of Avid Media Composer Adrenaline brought along a software version renumbering, as it was labeled Avid Media Composer Adrenaline 1.0. At this time, Avid began using MXF (Material Exchange Format) formatting for media files. Avid products maintain compatibility with OMFI files.

Adrenaline was the first Media Composer system to support 24bit audio. It also meant the end of Film Composer and Media Composer Offline, since the Avid Media Composer Adrenaline featured most of the film options and online resolutions and features. From this point onward, Avid systems have supported media storage using SCSI, PCI-e, SATA, IEEE 1394a & b, Ethernet and fiberoptic interfaces.

In 2006, Media Composer 2.5 was the first version to be offered 'software-only', giving the user the option of purchasing and using the software without the additional cost of the external accelerators. Software-only Avids use third-party breakout boxes, usually interfaced via Firewire, to acquire video from SDI and analog sources.

In 2008, the Mojo DX and Nitris DX were introduced, replacing the Adrenaline. Both are capable of handling uncompressed HD video, with the Nitris DX offering greater processing speed and input/output flexibility.