Massachusetts Route 3 - History

History

Route 3 began as a new designation for New England Highway 6 in 1927 when the U.S. Highway system was created and New England highway Route 3 was chosen to be US 6. The former NE 6 then took the route 3 number with U.S. Route 3 designated north of its intersection with U.S. Route 1 and Massachusetts Route 3 to the south. The route was basically a connected system of two-lane roadways up until the 1950s with the exception of Route 3's original path through Boston which paired it with US 1 on Park Drive, the Riverway and the Jamaicaway and then along its own path in Mattapan and Dorchester along the Arborway, Morton Street and Gallivan Boulevard.

Before the road was rerouted, the road continued over the Cape Cod Canal via the Sagamore Bridge to the Bourne Rotary, to the south of the Bourne Bridge. This arrangement changed after 1951.

The Plimoth Plantation Highway, a two-lane expressway that connects Route 3 with Route 3A, was once signed as Route 3 before the southernmost portion of the freeway to Cape Cod was finished.

The first section of the Pilgrims Highway was built as a bypass of Plymouth in the early 1950s. The mid-1950s saw an extension of this bypass route south to the Sagamore Bridge and north to Kingston. The northern section of the highway was built next with a connection from Derby Street in Hingham to the Southeast Expressway opening in 1959. (Portions of this road run alongside the Old Colony Railroad's mainline, now used by the MBTA Old Colony Lines Commuter Rail, and the MBTA Red Line rapid transit.) Finally the last sections between Hingham and Duxbury were completed by 1963 when the Route 3 designation was moved onto the completed freeway. The former Route 3 highways became Route 3A in Quincy and from Kingston south, the remainder became Route 53. Route 3 was connected to the Southeast Expressway in Milton by using Granite Avenue as a link from Gallivan Boulevard. Until around 1965, the northern portion of the Pilgrims Highway, from current Exit 15 (Derby Street) in Hingham, was also signed as Route 128, which continued past the exit on surface streets to Hull. However, by 1966 the 128 designation was removed past its intersection with Route 3 in Braintree (and thus from the Pilgrims Highway entirely) and the surface portion became Massachusetts Route 228. Route 3 was then taken off its remaining pathway along surface streets in Boston and extended up the Southeast Expressway and Central Artery in 1971 to the Storrow Drive exit. The routing of Route 3 has changed little since that time.

A re-signing project from 2006 to 2009 changed exit 20 to exit 20A for I-93 south and exit 20B for I-93 north. In the process, the ramp carrying Route 3 to I-93 north was no longer signed as part of Route 3. Separate signs indicating Route 3's routing along I-93 were installed on exit sign support poles in 2011.

The MassDOT is currently looking in to the possibility, in a similar manner to what has been ongoing for a 14+ mile length of Route 128's southwest section, of widening Route 3 from I-93 to the Sagamore Bridge from four to six lanes with new bridges and new on- and off-ramps, and will include upgraded interchanges with new acceleration and deceleration lanes. The project is expected to cost $256 million.