List Of Semiconductor Materials
Semiconductor materials are nominally small band gap insulators. The defining property of a semiconductor material is that it can be doped with impurities that alter its electronic properties in a controllable way.
Because of their application in devices like transistors (and therefore computers) and lasers, the search for new semiconductor materials and the improvement of existing materials is an important field of study in materials science.
Most commonly used semiconductor materials are crystalline inorganic solids. These materials are classified according to the periodic table groups of their constituent atoms.
Different semiconductor materials differ in their properties. Thus, in comparison with silicon, compound semiconductors have both advantages and disadvantages. For example, gallium arsenide (GaAs) has six times higher electron mobility than silicon, which allows faster operation; wider band gap, which allows operation of power devices at higher temperatures, and gives lower thermal noise to low power devices at room temperature; its direct band gap gives it more favorable optoelectronic properties than the indirect band gap of silicon; it can be alloyed to ternary and quaternary compositions, with adjustable band gap width, allowing light emission at chosen wavelengths, and allowing e.g. matching to wavelengths with lowest losses in optical fibers. GaAs can be also grown in a semi-insulating form, which is suitable as a lattice-matching insulating substrate for GaAs devices. Conversely, silicon is robust, cheap, and easy to process, whereas GaAs is brittle and expensive, and insulation layers can not be created by just growing an oxide layer; GaAs is therefore used only where silicon is not sufficient.
By alloying multiple compounds, some semiconductor materials are tunable, e.g., in band gap or lattice constant. The result is ternary, quaternary, or even quinary compositions. Ternary compositions allow adjusting the band gap within the range of the involved binary compounds; however, in case of combination of direct and indirect band gap materials there is a ratio where indirect band gap prevails, limiting the range usable for optoelectronics; e.g. AlGaAs LEDs are limited to 660 nm by this. Lattice constants of the compounds also tend to be different, and the lattice mismatch against the substrate, dependent on the mixing ratio, causes defects in amounts dependent on the mismatch magnitude; this influences the ratio of achievable radiative/nonradiative recombinations and determines the luminous efficiency of the device. Quaternary and higher compositions allow adjusting simultaneously the band gap and the lattice constant, allowing increasing radiant efficiency at wider range of wavelengths; for example AlGaInP is used for LEDs . Materials transparent to the generated wavelength of light are advantageous, as this allows more efficient extraction of photons from the bulk of the material. That is, in such transparent materials, light production is not limited to just the surface. Index of refraction is also composition-dependent and influences the extraction efficiency of photons from the material.
Read more about List Of Semiconductor Materials: Types of Semiconductor Materials, Table of Semiconductor Materials
Famous quotes containing the words list of, list and/or materials:
“Do your children view themselves as successes or failures? Are they being encouraged to be inquisitive or passive? Are they afraid to challenge authority and to question assumptions? Do they feel comfortable adapting to change? Are they easily discouraged if they cannot arrive at a solution to a problem? The answers to those questions will give you a better appraisal of their education than any list of courses, grades, or test scores.”
—Lawrence Kutner (20th century)
“Modern tourist guides have helped raised tourist expectations. And they have provided the natives—from Kaiser Wilhelm down to the villagers of Chichacestenango—with a detailed and itemized list of what is expected of them and when. These are the up-to- date scripts for actors on the tourists’ stage.”
—Daniel J. Boorstin (b. 1914)
“Our job is now clear. All Americans must be prepared to make, on a 24 hour schedule, every war weapon possible and the war factory line will use men and materials which will bring, the war effort to every man, woman, and child in America. All one hundred thirty million of us will be needed to answer the sunrise stealth of the Sabbath Day Assassins.”
—Lyndon Baines Johnson (1908–1973)