Hitachi Hatsukaze - Design and Development

Design and Development

Hatsukaze engines were produced in very large numbers, as the powerplant for the license-built Bücker Bü 131 Jungmann variants that were the standard primary trainers for the Imperial Japanese Navy and Imperial Japanese Army.

The naval version of the engine was designated GK4, the army version as Ha-47.

The Hatsukaze Model 12 was the power section linked to a compressor to create a primitive jet engine called a motorjet, the resulting Tsu-11 was intended to power Yokosuka MXY7 Ohka 22 flying bombs. The standard Hatsukaze 11 engine was modified at a Navy arsenal by replacing the propeller drive shaft and engine front crankcase cover with a step-up gearbox. After modification, the engine was designated as the . The gearbox increased engine output shaft RPM at a 1:3 ratio. At engine speed of 3,000 RPM, the compressor section was operating at 9,000 RPM. The compressed air was then ducted into a combustion chamber where a liquid fuel was sprayed. The heated compressed air then exits through the tailpipe providing static thrust of 180 kg (396 lb). It is likely that about 1/3 of the total thrust was contributed by adding the combustion chamber aft of the compressor.

The Tsu-11 was also selected to power the Yokosuka MXY-9 Shuka ("Autumn Fire"), a trainer intended to prepare pilots for the Mitsubishi J8M rocket-powered interceptor. Neither of these aircraft entered service, however, as their development took place too late in the war.