Selection
Due to the many variables involved, selecting optimal heat exchangers is challenging. Hand calculations are possible, but many iterations are typically needed. As such, heat exchangers are most often selected via computer programs, either by system designers, who are typically engineers, or by equipment vendors.
To select an appropriate heat exchanger, the system designers (or equipment vendors) would firstly consider the design limitations for each heat exchanger type. Though cost is often the primary criterion, several other selection criteria are important:
- High/low pressure limits
- Thermal performance
- Temperature ranges
- Product mix (liquid/liquid, particulates or high-solids liquid)
- Pressure drops across the exchanger
- Fluid flow capacity
- Cleanability, maintenance and repair
- Materials required for construction
- Ability and ease of future expansion
Choosing the right heat exchanger (HX) requires some knowledge of the different heat exchanger types, as well as the environment where the unit must operate. Typically in the manufacturing industry, several differing types of heat exchangers are used for just the one process or system to derive the final product. For example, a kettle HX for pre-heating, a double pipe HX for the ‘carrier’ fluid and a plate and frame HX for final cooling. With sufficient knowledge of heat exchanger types and operating requirements, an appropriate selection can be made to optimise the process.
Read more about this topic: Heat Exchanger
Famous quotes containing the word selection:
“Judge Ginsburg’s selection should be a model—chosen on merit and not ideology, despite some naysaying, with little advance publicity. Her treatment could begin to overturn a terrible precedent: that is, that the most terrifying sentence among the accomplished in America has become, “Honey—the White House is on the phone.””
—Anna Quindlen (b. 1952)
“When you consider the radiance, that it does not withhold
itself but pours its abundance without selection into every
nook and cranny”
—Archie Randolph Ammons (b. 1926)
“It is the highest and most legitimate pride of an Englishman to have the letters M.P. written after his name. No selection from the alphabet, no doctorship, no fellowship, be it of ever so learned or royal a society, no knightship,—not though it be of the Garter,—confers so fair an honour.”
—Anthony Trollope (1815–1882)