Forklift Control and Capabilities
A Forklifts hydraulics are controlled with either levers directly manipulating the hydraulic valves, or by electrically controlled actuators, using smaller "finger" levers for control. the latter allows forklift designers more freedom in ergonomical design.
Forklift trucks are available in many variations and load capacities. In a typical warehouse setting most forklifts used have load capacities between one to five tons. Larger machines, up to 50 tons lift capacity are used for lifting heavier loads, including loaded shipping containers.
In addition to a control to raise and lower the forks (also known as blades or tines), the operator can tilt the mast to compensate for a load's tendency to angle the blades toward the ground and risk slipping off the forks. Tilt also provides a limited ability to operate on non-level ground. Skilled forklift operators annually compete in obstacle and timed challenges at regional forklift rodeos.
Read more about this topic: Forklift Truck
Famous quotes containing the words control and/or capabilities:
“Only one thing is certain: if pot is legalized, it won’t be for our benefit but for the authorities’. To have it legalized will also be to lose control of it.”
—Germaine Greer (b. 1939)
“I maintain that I have been a Negro three times—a Negro baby, a Negro girl and a Negro woman. Still, if you have received no clear cut impression of what the Negro in America is like, then you are in the same place with me. There is no The Negro here. Our lives are so diversified, internal attitudes so varied, appearances and capabilities so different, that there is no possible classification so catholic that it will cover us all, except My people! My people!”
—Zora Neale Hurston (1891–1960)