Floor Tom

A floor tom is a double-headed tom-tom drum which usually stands on the floor on three legs. However, they can also be attached to a cymbal stand with a drum clamp, or supported by a rim mount.

The floor toms are the lowest tuned drums played with sticks in the regular 5 piece drum set. Common sizes are

• 16x16, that is, 16 inches (41 cm) in both depth and diameter. This was the original size and is still most common.
• 14 inches (36 cm)x14 for jazz and fusion kits.
• 18x16; that is, 18 inches (46 cm) in diameter and 16 in depth, for a second floor tom.
• 16x18, a rarer size sometimes used for a second floor tom.

Floor toms can be mounted:

• In the traditional manner, with three adjustable legs.
• On three legs but connected to them by means of a rim mount on the lower rim, the original floor tom rim mounting.
• Attached to a drum rack or a (very heavy duty) cymbal stand by means of a rim mount on the top or bottom rim.
• Attached to a drum rack or a cymbal stand by means of a standard hanging tom mount on the drum shell. This method is generally restricted to the smaller, 14x14 floor toms.

The floor tom was popularized by Gene Krupa in the 1950s, using a 16x16. At first he placed it between his two bass drums, on the far side of his snare drum, but quickly moved it to its now traditional position to the right of his right leg.

A second 16x18 floor tom, to the right of the 16x16, appeared in the late 1960s and was popularized as part of the extended kits used by progressive rock bands in the 1970s. In kits used by rock and metal drummers, it is very common to find more than one floor tom. Roger Taylor of Queen uses two floor toms that are 16x16 and 16x18 while Lars Ulrich of Metallica uses two floor toms that are 16x16 and 18x16.

The floor tom is also used as a small bass drum by some (mostly jazz) drummers. In that case it is mounted horizontally on a specially designed rack system. More recently, companies such as Pearl have come out with "floor tom to bass drum conversion sets". These commonly consist of strategically shaped rods that one can put in place of the floor tom legs in order to stand it up horizontally. Under this method, it is fairly common that a drummer get appropriately sized bass drum hoops to complete the conversion process.