Fitz John - History

History

The FitzJohn company was formed in 1919 to build truck and bus bodies. The former were mostly for Ford chassis, while the latter were for REOs. Originally sold under the Fitz-Er marque, the buses were soon badged as FitzJohn. FitzJohn's best selling point was the low price relative to its quality, which led to enough success that a new plant was purchased in 1924, five times larger than the original. Sales continued to increase, doubling from 1924 to 1925, and in the late 1920s FitzJohn was delivering almost 300 bodies a year. At that time FitzJohn models had a simple letter designation, although some had rather basic names, too. However, since so many options (such as rooftop luggage racks or polished aluminum bright-work) were offered, many of the variations were also given Indian names by the company's sales & marketing department.

From 1 January 1929, FitzJohn began selling directly to consumers, rather than exclusively through chassis manufacturers and dealers. This change, however, did not prevent a 40% decline in sales due to the Depression, and on 8 June 1931, the company went into receivership. Its founder (H.A. FitzJohn) was forced out, and went into partnership with Paul O. Dittmar to produce the 12- to 15-passenger Dittmar-FitzJohn Autocoach (similar to the model D, but with a lowered aisle along the right side). H.A. FitzJohn later became the first manager of the General American Aerocoach Company.

In 1934 FitzJohn introduced its 11-passenger stretchout model 100. It was based on the Chevrolet Master Sedan which was split in the middle, had an extra body section inserted and a baggage rack added to the roof. The 100 was an immediate success, primarily as an economical "mini-coach" for feeder routes, although some were used for airport transfers or sightseeing services. During World War II, when many other bus manufacturers suspended production in favour of war materiel, the War Production Board directed FitzJohn to build a 15-passenger version of the 100. Otherwise-surplus Chevrolet, Pontiac and Packard sedans had extra rows of back-to-back seats installed, but because of wartime restrictions, white ash framing and Masonite panels were used instead of metal. Sixty-two enclosed auto haulers were also converted to passenger-carrying trailers in 1943.

Starting about 1940, under the direction of James J. St.Croix FitzJohn began to switch from building bodies for other manufacturers' chassis to their own integral models. The last bus body delivered was a model 625 in March 1940 for a White 1012 demonstrator chassis. In 1950 diesel power began to be offered as an option. At the same time the current models were redesigned with rear engines. Even though the Cityliner offered unparalleled maintenance access to the engine (the rear corner panels swung out, as well as the back panels lifted up), FitzJohn could not compete against the larger manufacturers (such as GM and Twin Coach) and decided to leave the transit market in 1954.

FitzJohn's last offering was the Road-runner. Officially designated the FID (FitzJohn Interurban Diesel with a 150 hp Cummins JBS-600) or FIG (with a Gasoline Waukesha 176 hp 140-GK), the Road-runner was offered as a 37-passenger coach with a 237-inch (6.0 m) wheelbase, or a shortened 33-seat version on a 201-inch (5.1 m) wheelbase. Only 14 FIGs were built, and all but a handful of the Road-runners were 37-seaters. The last FitzJohns built for an American customer were five Road-runner Sightseer variants (with roof windows) for Florida Greyhound Lines. The 85,000-square-foot (7,900 m2) Muskegon factory closed in May 1958, after the last order of 54 FIDs was delivered to Mexico.

Sales records exist for the 31 years 1927 through 1958. During that time FitzJohn constructed 2,621 buses and coaches, 1,460 bodies, 776 stretchouts, and 62 trailer conversions. It is estimated that over 400 bus bodies—plus a small number of truck bodies—were built in the years 1921–1927, for a total of over 5,300 units.