Electrostatic Loudspeaker - Advantages

Advantages

Advantages of electrostatic loudspeakers include levels of distortion one to two orders of magnitude lower than conventional cone drivers in a box, the extremely light weight of the diaphragm which is driven across its whole surface, and exemplary frequency response (both in amplitude and phase) because the principle of generating force and pressure is almost free from resonances unlike the more common electrodynamic driver. Musical transparency can be better than in electrodynamic speakers because the radiating surface has much less mass than most other drivers and is therefore far less capable of storing energy to be released later. For example, typical dynamic speaker drivers can have moving masses of tens or hundreds of grams whereas an electrostatic membrane only weighs a few milligrams, several times less than the very lightest of electrodynamic tweeters. The concomitant air load, often insignificant in dynamic speakers, is usually tens of grams because of the large coupling surface, this contributing to damping of resonance buildup by the air itself to a significant, though not complete, degree. Electrostatics can also be executed as full-range designs, lacking the usual crossover filters and enclosures that could color or distort the sound.

Since many electrostatic speakers are tall and thin designs without an enclosure, they act as a vertical dipole line source. This makes for rather different acoustic behavior in rooms compared to conventional electrodynamic loudspeakers. Generally speaking, a large-panel dipole radiator is more demanding of a proper physical placement within a room when compared to a conventional box speaker, but, once there, it is less likely to excite bad-sounding room resonances, and its direct-to-reflected sound ratio is higher by some 4–5 decibels. This in turn leads to more accurate stereo reproduction of recordings that contain proper stereo information and venue ambience. Planar (flat) drivers tend to be very directional giving them good imaging qualities, on the condition that they have been carefully placed relative to the listener and the sound-reflecting surfaces in the room. Curved panels have been built, making the placement requirements a bit less stringent, but sacrificing imaging precision somewhat.