Advantages and Disadvantages
The main advantages of DPI are the speed of the test and the low cost. Disadvantages include the detection of only surface flaws, skin irritation, and the inspection should be on a smooth clean surface where excessive penetrant can be removed prior to being developed. Conducting the test on rough surfaces, such-as-welded welds, will make it difficult to remove any excessive penetrant and could result in false indications. Water-washable penetrant should be considered here if no other option is available. Also, on certain surfaces a great enough color contrast cannot be achieved or the dye will stain the workpiece.
Limited training is required for the operator — although experience is quite valuable. Proper cleaning is necessary to assure that surface contaminants have been removed and any defects present are clean and dry. Some cleaning methods have been shown to be detrimental to test sensitivity, so acid etching to remove metal smearing and re-open the defect may be necessary.
Read more about this topic: Dye Penetrant Inspection
Famous quotes containing the word advantages:
“There are great advantages to seeing yourself as an accident created by amateur parents as they practiced. You then have been left in an imperfect state and the rest is up to you. Only the most pitifully inept child requires perfection from parents.”
—Frank Pittman (20th century)