Applications
Direct-current installations usually have different types of sockets, switches, and fixtures, mostly due to the low voltages used, from those suitable for alternating current. It is usually important with a direct-current appliance not to reverse polarity unless the device has a diode bridge to correct for this (most battery-powered devices do not).
DC is commonly found in many low-voltage applications, especially where these are powered by batteries, which can produce only DC, or solar power systems, since solar cells can produce only DC. Most automotive applications use DC, although the alternator is an AC device which uses a rectifier to produce DC. Most electronic circuits require a DC power supply. Applications using fuel cells (mixing hydrogen and oxygen together with a catalyst to produce electricity and water as byproducts) also produce only DC.
Through the use of a DC-DC converter, high DC voltages such as 48V to 72V DC can be stepped down to 36V, 24V, 18V, 12V or 5V to supply different loads. In a telecommunications system operating at 48V DC, it is generally more efficient to step voltage down to 12V to 24VDC with a DC-DC converter and power equipment loads directly at their native DC input voltages versus operating a 48VDC to 120VAC inverter to provide power to equipment.
Many telephones connect to a twisted pair of wires, and internally separate the AC component of the voltage between the two wires (the audio signal) from the DC component of the voltage between the two wires (used to power the phone).
Telephone exchange communication equipment, such as DSLAM, uses standard -48V DC power supply. The negative polarity is achieved by grounding the positive terminal of power supply system and the battery bank. This is done to prevent electrolysis depositions.
Read more about this topic: DC Circuit