Data Terminal Equipment

Data terminal equipment (DTE) is an end instrument that converts user information into signals or reconverts received signals. These can also be called tail circuits. A DTE device communicates with the data circuit-terminating equipment (DCE). The DTE/DCE classification was introduced by IBM.

Basically, V.35 is a high-speed serial interface designed to support both higher data rates and connectivity between DTEs (data-terminal equipment) or DCEs (data-communication equipment) over digital lines.

Two different types of devices are assumed on each end of the interconnecting cable for a case of simply adding DTE to the topology (e.g. to a hub, DCE), which also brings a less trivial case of interconnection of devices of the same type: DTE-DTE or DCE-DCE. Such cases need crossover cables, such as for the Ethernet or null modem for RS-232.

A DTE is the functional unit of a data station that serves as a data source or a data sink and provides for the data communication control function to be performed in accordance with the link protocol.

The data terminal equipment may be a single piece of equipment or an interconnected subsystem of multiple pieces of equipment that perform all the required functions necessary to permit users to communicate. A user interacts with the DTE (e.g. through a human-machine interface), or the DTE may be the user.

Usually, the DTE device is the terminal (or a computer emulating a terminal), and the DCE is a modem or another carrier-owned device.

A general rule is that DCE devices provide the clock signal (internal clocking) and the DTE device synchronizes on the provided clock (external clocking). D-sub connectors follow another rule for pin assignment.

  • 25 pin DTE devices transmit on pin 2 and receive on pin 3.
  • 25 pin DCE devices transmit on pin 3 and receive on pin 2.
  • 9 pin DTE devices transmit on pin 3 and receive on pin 2.
  • 9 pin DCE devices transmit on pin 2 and receive on pin 3.

This term is also generally used in the Telco and Cisco equipment context to designate a network device, such as terminals, personal computers but also routers and bridges, that's unable or configured not to generate clock signals. Hence a PC to PC Ethernet connection can also be called a DTE to DTE communication. This communication is done via an Ethernet crossover cable as opposed to a PC to DCE (hub, switch, or bridge) communication which is done via an Ethernet straight cable.

Famous quotes containing the words data, terminal and/or equipment:

    To write it, it took three months; to conceive it three minutes; to collect the data in it—all my life.
    F. Scott Fitzgerald (1896–1940)

    All sin tends to be addictive, and the terminal point of addiction is what is called damnation.
    —W.H. (Wystan Hugh)

    Dr. Scofield’s equipment, which you have just seen, radiated waves direct to Professor Houghland’s laboratory. When these waves came in contact with those the professor’s equipment was radiating, they created the interstellar frequency, which is the death ray.
    Joseph O’Donnell, and Clifford Sanforth. Arthur Perry (Bela Lugosi)