Colossus Computer - Construction

Construction

Tommy Flowers was a senior engineer at the Post Office Research Station, Dollis Hill, in northwest London. He had previously been involved with GC&CS at Bletchley Park from February 1941 in an attempt to improve the Bombes that were used in the Cryptanalysis of the Enigma German cipher machine. He was recommended to Max Newman by Alan Turing and spent eleven months from early February 1943 designing and building the first Colossus. His team included Sidney Broadhurst, William Chandler, Allen Coombs and Harry Fensom, After a functional test in December 1943, Colossus was dismantled and shipped north to Bletchley Park, where it was delivered on 18 January 1944 and assembled by Harry Fensom and Don Horwood, and attacked its first message on 5 February.

The first, prototype, Colossus (Mark 1), was followed by nine Mark 2 machines, the first being commissioned in June 1944, and the original Mark 1 machine was converted into a Mark 2. An eleventh Colossus was essentially finished at the end of the war. Colossus Mark 1 contained 1500 thermionic valves (tubes). Colossus Mark 2 with 2400 valves was both 5 times faster and simpler to operate than Mark 1, greatly speeding the decoding process. Mark 2 was designed while Mark 1 was being constructed. Allen Coombs took over leadership of the Colossus Mark 2 project when Tommy Flowers moved on to other projects. For comparison, later stored-program computers such as the Manchester Mark 1 of 1949 used 4050 valves, while ENIAC (1946) used 17,468 valves.

Colossus dispensed with the second tape of the Heath Robinson design by generating the wheel patterns electronically, and processing 5,000 characters per second with the paper tape moving at 40 ft/s (12.2 m/s or 27.3 mph). The circuits were synchronized by a clock signal generated by the sprocket holes of the punched tape. The speed of calculation was thus limited by the mechanics of the tape reader. Tommy Flowers tested the tape reader up to 9,700 characters per second (53 mph) before the tape disintegrated. He settled on 5,000 characters/second as the desirable speed for regular operation. Sometimes, two or more Colossus computers tried different possibilities simultaneously in what now is called parallel computing, speeding the decoding process by perhaps as much as double the rate of comparison.

Colossus included the first ever use of shift registers and systolic arrays, enabling five simultaneous tests, each involving up to 100 Boolean calculations, on each of the five channels on the punched tape (although in normal operation only one or two channels were examined in any run).

Initially Colossus was only used to determine the initial wheel positions used for a particular message (termed wheel setting). The Mark 2 included mechanisms intended to help determine pin patterns (wheel breaking). Both models were programmable using switches and plug panels in a way the Robinsons had not been.