Cold Fusion - Reported Results

Reported Results

A cold fusion experiment usually includes:

• a metal, such as palladium or nickel, in bulk, thin films or powder;
• deuterium and/or hydrogen, in the form of water, gas or plasma; and
• an excitation in the form of electricity, magnetism, temperature, pressure, laser beam(s), or of acoustic waves.

Electrolysis cells can be either open cell or closed cell. In open cell systems, the electrolysis products, which are gaseous, are allowed to leave the cell. In closed cell experiments, the products are captured, for example by catalytically recombining the products in a separate part of the experimental system. These experiments generally strive for a steady state condition, with the electrolyte being replaced periodically. There are also "heat after death" experiments, where the evolution of heat is monitored after the electric current is turned off.

The most basic setup of a cold fusion cell consists of two electrodes submerged in a solution containing palladium and heavy water. The electrodes are then connected to a power source to transmit electricity from one electrode to the other through the solution. Even when anomalous heat is reported, it can take weeks for it to begin to appear – this is known as the "loading time," the time required to saturate the palladium electrode with hydrogen (see "Loading ratio" section).

The Fleischmann and Pons early findings regarding helium, neutron radiation and tritium were never replicated satisfactorily, and its levels were too low for the claimed heat production and inconsistent with each other. Neutron radiation has been reported in cold fusion experiments at very low levels using different kinds of detectors, but levels were too low, close to background, and found too infrequently to provide useful information about possible nuclear processes.