Asynchronous Serial Communication

Asynchronous serial communication describes an asynchronous, serial transmission protocol in which a start signal is sent prior to each byte, character or code word and a stop signal is sent after each code word. The start signal serves to prepare the receiving mechanism for the reception and registration of a symbol and the stop signal serves to bring the receiving mechanism to rest in preparation for the reception of the next symbol. A common kind of start-stop transmission is ASCII over RS-232, for example for use in teletypewriter operation.

In the diagram, two bytes are sent, each consisting of a start bit, followed by eight data bits (bits 0-7), and one stop bit, for a 10-bit character frame. The last data bit is sometimes used as a parity bit. The number of data and formatting bits, the order of data bits, the presence or absence of a parity bit, the form of parity (even or odd) and the transmission speed must be pre-agreed by the communicating parties.

The "stop bit" is actually a "stop period"; the stop period of the transmitter may be arbitrarily long. It cannot be shorter than a specified amount, usually 1 to 2 bit times. The receiver requires a shorter stop period than the transmitter. At the end of each character, the receiver stops briefly to wait for the next start bit. It is this difference which keeps the transmitter and receiver synchronized.

Read more about Asynchronous Serial Communication:  Origins With Teletypewriters

Famous quotes containing the word serial:

    The serial number of a human specimen is the face, that accidental and unrepeatable combination of features. It reflects neither character nor soul, nor what we call the self. The face is only the serial number of a specimen.
    Milan Kundera (b. 1929)