12-hour Clock - History and Use

History and Use

The 12-hour clock can be traced back as far as Mesopotamia and Ancient Egypt: Both an Egyptian sundial for daytime use and an Egyptian water clock for nighttime use were found in the tomb of Pharaoh Amenhotep I. Dating to c. 1500 BC, these clocks divided their respective times of use into 12 hours each.

The Romans also used a 12-hour clock: daylight was divided into 12 equal hours (of, thus, varying length throughout the year) and the night was divided into four watches. The Romans numbered the morning hours originally in reverse. For example, "3 a.m." or "3 hours ante meridiem" meant "three hours before noon", compared to the modern usage of "three hours into the first 12-hour period of the day".

The first mechanical clocks in the 14th century, if they had dials at all, showed all 24 hours, using the 24-hour analog dial, influenced by astronomers' familiarity with the astrolabe and sundial, and their desire to model the apparent motion of the Sun. In Northern Europe these dials generally used the 12-hour numbering scheme in Roman numerals, but showed both a.m. and p.m. periods in sequence. This is known as the Double-XII system, and can be seen on many surviving clock faces, such as those at Wells and Exeter. Elsewhere in Europe, particularly in Italy, numbering was more likely to be based on the 24-hour system (I to XXIV), reflecting the Italian style of counting the hours. The 12-hour clock was used throughout the British empire but has largely been replaced by the 24-hour clock.

During the 15th and 16th centuries, the 12-hour analog dial and time system, with its simpler and more economical construction, gradually became established as standard throughout Northern Europe for general public use. The 24-hour analog dial was reserved for more specialized applications, such as astronomical clocks and chronometers.

Most analog clocks and watches today use the 12-hour dial, on which the shorter hour hand rotates once every 12 hours and twice in one day. Some analog clock dials have an inner ring of numbers along with the standard 1-to-12 numbered ring. The number 12 is paired either with a 00 or a 24, while the numbers 1 through 11 are paired with the numbers 13 through 23, respectively. This modification allows the clock to be read also in the 24-hour notation. The 12-hour clock can be found in countries where the 24-hour clock is preferred.